Commercial Kitchen Ducting Price Singapore: What Affects Cost

Commercial Kitchen Ducting Price

10/28/20268 min read

A longer duct route can affect the quote as much as the hood itself. There’s no single fixed commercial kitchen ducting price in Singapore: it depends on the kitchen’s size, cooking type, duct route, materials and required system components. Pricing is provided after a quote request.

It’s sensible to set a budget before planning a commercial kitchen. But a ducting figure alone can be misleading if it leaves out the hood, exhaust fan, filters and associated installation work. The design also needs to suit how the kitchen operates.

This article explains what shapes the project scope, what a commercial kitchen exhaust system includes and which Singapore requirements are relevant. You’ll also learn how duct layout, airflow needs and fire-safety provisions affect planning, so you can understand what an installation quote covers and make an informed decision.

Key Takeaways

  • Compare quotes by their full scope, including the hood, ductwork, fan, air cleaner and associated works, not by ducting alone.

  • Map the duct route and cooking needs carefully, since airflow requirements, bends and custom ductwork affect system design and cost.

  • Account for fire-safety provisions: commercial kitchen exhaust ducts must be fire-rated and non-combustible, with access panels at every bend.

  • Plan the hood, exhaust motor and ductwork as a coordinated system to support effective ventilation and day-to-day kitchen operations.

Table of Contents

Commercial kitchen ventilation system design and installation

Start with the cooking equipment and hood position. A wok line, grill or fryer produces a different plume of heat, smoke and grease, so the hood needs to capture air from the cooking area. Exhaust airflow is measured in cubic feet per minute (CFM), and the required airflow informs fan selection and duct sizing. Plan an outdoor duct route with minimal bends to support airflow. Where ducts run horizontally, they should slope towards the hood to help grease drain in that direction.

What is included in a commercial kitchen ducting installation quote in Singapore? It should set out the hood, duct, fan, air-cleaner system, and associated ducting and electrical cabling works. The Land Transport Authority (LTA) identifies associated ducting and electrical cabling as part of the system specification. The price depends on the case and is given after a quote request. The kitchen layout, cooking equipment, duct route, and system components shape the scope.

For an HDB flat, ducted kitchen hood conditions differ from commercial premises. HDB may allow ducting when it stays fully within the flat and the exhaust doesn’t cause nuisance to neighbours. A ducted installation may need to be removed if neighbours complain. HDB Bukit Merah Branch references for ducted hood installations are dated 7 Jun 2019; the Jurong West Branch reference is dated 29 Nov 2019. These conditions matter when assessing a residential installation, not a commercial kitchen project.

For commercial work, plan installation around the mechanical ventilation design. Singapore’s Building and Construction Authority (BCA) oversees mechanical ventilation design compliance for commercial kitchen exhaust systems. After installation and inspection, a Certificate of Compliance (CoC) is required. At handover, inspect duct joints and access points, then test airflow against the design. Record and resolve any issues before relying on the system for normal kitchen operations.

Exhaust system components, including hoods, filters, ducts, and fans

A commercial kitchen exhaust system combines a hood, filters, ductwork, fan and air-cleaner system. Each component has a distinct role: the hood captures grease-laden air, filters trap grease, and the fan moves extracted air through the duct to the outdoors. Land Transport Authority (LTA) specifications also identify associated ducting and electrical cabling as part of the system. Consider the complete route and equipment together rather than treating the hood as a standalone unit.

Hood style should suit the cooking line and available space. A wall-mounted hood sits above equipment against a wall, while an island hood serves equipment positioned away from walls. Both connect to ductwork that carries exhaust outdoors. Ductless hoods instead filter grease, smoke and odours, then recirculate cleaned air into the kitchen. A recirculating unit does not provide the same outdoor exhaust route as a ducted system. For ducted layouts, minimise bends and slope horizontal ducts towards the hood to help grease drain.

Fan design affects how the system moves air. An axial fan moves air along its shaft and is commonly used where the duct route offers less resistance. A bifurcated fan separates its motor from the main exhaust stream using a tunnel extending to the side of its casing. A box fan provides higher static pressure and better acoustic insulation than a bifurcated fan. Match the fan to the duct layout and airflow requirement, rather than choosing by appearance alone.

Filters influence both maintenance and discharge. Reusable baffle filters can be soaked or washed in a dishwasher; activated carbon filters trap odour compounds through adsorption and need replacement when saturated. Poor odour control, grease build-up, or fan noise can create nuisance around neighbouring units. For a coordinated layout, review commercial kitchen exhaust planning alongside the hood, duct, and fan positions.

Cost factors such as kitchen size, cooking type, materials, and fire suppression

Myth: A small kitchen always needs a simple, low-cost exhaust setup. Reality: Kitchen size matters, but cooking equipment and duct routing also shape the system. A fryer or grill produces grease-laden air that needs effective capture and extraction. A longer route, extra bends, or restricted access can add ductwork and installation complexity. The commercial kitchen ducting price in Singapore depends on the case and is given after a quote request. Key factors include kitchen layout, cooking type, duct route, materials, and fire-suppression integration.

Material and safety requirements also affect the design. Commercial kitchen exhaust ducts must be fire-rated and non-combustible. Access panels are required at every bend for cleaning and inspection, so a route with several bends needs more access points than a straight run. Grease accumulation in ducts raises fire risk and can reduce ventilation efficiency. Cleaning access is therefore a practical design requirement, not an optional extra.

What are typical maintenance and cleaning costs for commercial kitchen ducting in Singapore? The cost depends on grease loading, duct access, route length, and cleaning scope. High-grease kitchens, including Chinese, BBQ, and fried-food kitchens, are advised to clean systems every 1–3 months. Medium-volume kitchens, such as cafés and hotels, are advised to clean every 3–6 months; low-volume kitchens, such as bakeries and schools, every 6–12 months.

What extra costs can arise when retrofitting kitchen ducting in a Singapore restaurant? Retrofit work can involve adapting the duct route to the existing layout, adding access panels at bends, and coordinating associated ducting or electrical cabling. Restricted ceiling space or a longer route can increase the work required. Fire-suppression integration can also affect the project scope.

SCDF requires automatic fire suppression within commercial cooking hoods. Include this provision in the design from the outset, alongside fire-rated ducting and cleaning access. For example, a fryer line may need a hood and suppression arrangement suited to its cooking equipment, while the duct route must still allow inspection and grease removal.

SCDF, NEA, and BCA requirements

Commercial kitchen exhaust design in Singapore involves fire safety, ventilation design, and air discharge. The Singapore Civil Defence Force (SCDF) Code of Practice for Fire Precautions in Buildings 2018 is relevant to hood, duct, and fan installation. Commercial exhaust ducts must be fire-rated and non-combustible. Access panels are required at every bend, supporting inspection and grease removal. These provisions affect the duct route, materials, and access points that need to be included in the project scope.

The Building and Construction Authority (BCA) oversees mechanical ventilation design compliance for commercial kitchen exhaust systems. The National Environment Agency (NEA) oversees odour and air discharge control. These roles address different parts of the system. A design review should consider airflow from the cooking area, the duct route and the exhaust discharge point. Odour control matters beyond the kitchen, especially where outlets are close to neighbouring premises or occupied areas.

Use a compliance-focused sequence during planning. First, map the hood and duct route against the kitchen layout. Next, account for fire-rated duct construction and access panels at each bend. Then consider discharge location and odour control. After installation and inspection, a Certificate of Compliance (CoC) is required. Keeping the design, installation, and inspection aligned supports a clear handover and peace of mind. It also helps identify design issues before the kitchen relies on the system.

Maintenance supports ongoing operation, too. High-grease kitchens, including Chinese, BBQ, and fried-food kitchens, are advised to clean exhaust systems every 1–3 months. Medium-volume kitchens, such as cafés and hotels, are advised to clean every 3–6 months. Low-volume kitchens, including bakeries and schools, are advised to clean every 6–12 months. Accessible panels make it easier to reach duct bends during cleaning and inspection.

For a project-specific review of your kitchen’s layout, discharge route, and compliance needs, discuss commercial kitchen exhaust planning.

Air Flow M&E Pte: Commercial Kitchen Hood Installation

Air Flow M&E Pte Ltd supports commercial kitchen projects with commercial hood installation, exhaust motor installation and custom-fitted ductwork. These services suit new exhaust setups and changes to an existing kitchen layout. Matching the hood, motor and ductwork to the cooking area helps define a coordinated installation scope.

For an existing kitchen, Air Flow M&E Pte Ltd provides Commercial Kitchen Exhaust System Addition & Alteration (A&A) Services. The project scope depends on the kitchen layout, cooking equipment, duct route and applicable requirements. Share these details when requesting a quote so the proposed work reflects the installation needs.

To discuss commercial kitchen hood installation or ductwork for your project, contact Air Flow M&E Pte Ltd or visit myairflow.sg.

Move from planning to a project-ready scope

To build a commercial kitchen ducting price Singapore operators can plan around, record the cooking equipment, kitchen layout, proposed hood position, and any changes to an existing exhaust system. These details help define the work required. Pricing depends on the project scope and is provided after a quote request.

Air Flow M&E Pte Ltd offers Commercial Kitchen Exhaust System Addition & Alteration (A&A) Services, Commercial Kitchen Hood Installation, and Commercial Exhaust Motor Installation. Use the same project details to make a commercial kitchen ducting price Singapore businesses can compare across quotes. A clear scope gives the project a practical starting point and helps organise the next decisions.

Share your project requirements with Air Flow M&E Pte Ltd to discuss the next step. Contact Air Flow M&E Pte Ltd and move your commercial kitchen ventilation plans forward with confidence.

Frequently Asked Questions

How much does commercial kitchen ducting cost per metre in Singapore?

A per-metre figure alone won’t show the full commercial kitchen ducting price in Singapore. The project scope also includes duct dimensions, bends, connections, supports and integration with the hood and exhaust fan. A quote should set out these items clearly. Air Flow M&E Pte Ltd offers fixed upfront pricing with no hidden fees.

What factors affect commercial kitchen ducting installation cost in Singapore?

Installation scope is shaped by the kitchen layout, cooking equipment, duct route, material specification and system components. For example, a route through a crowded ceiling space may require different coordination from an accessible straight run. Changes to an existing kitchen can also involve adapting connections to the current exhaust system. A useful project brief includes equipment positions, plans and the intended discharge route.

How much do ducting materials, exhaust hoods, fans, and filters cost in Singapore?

There isn’t one component price that applies to every commercial kitchen. Duct material and dimensions, hood design, fan requirements and filter type all affect the equipment and installation scope. Compare complete quotations by checking which components and installation work are included. Air Flow M&E Pte Ltd provides fixed upfront pricing with no hidden fees.

Do commercial kitchen ducting installations in Singapore require permits or approvals?

Commercial kitchen exhaust projects must address design compliance and inspection requirements. The Building and Construction Authority (BCA) oversees mechanical ventilation design compliance, while SCDF’s Code of Practice for Fire Precautions in Buildings 2018 is relevant to hood, duct, and fan installation. A Certificate of Compliance (CoC) is required after installation and inspection. NEA oversees odour and air discharge control.

How do stainless steel and galvanised steel kitchen ducts compare in price and durability?

Stainless steel and galvanised steel differ in material properties, fabrication requirements, and suitability for the kitchen environment. Stainless steel offers corrosion resistance, while galvanised steel has a zinc coating that protects the underlying steel. Price depends on the specified grade, thickness, duct dimensions, and fabrication details. Compare the proposed material specification alongside the route and cleaning access, not by material name alone.

How long does commercial kitchen ducting installation take in Singapore?

Installation time depends on the duct route, site access, amount of custom fabrication and whether existing equipment needs alteration. A straightforward installation with clear access differs from a retrofit requiring coordination around existing services and kitchen operations. The work generally involves preparing the installation area, fitting the ductwork and connected components, then completing inspection and an airflow output test before handover.